秸稈的影響煤成型機雨后是好的-秸稈成型機 飼料顆粒機 反擊式破碎機 螺旋分級機
譽恒品牌秸稈煤成型機,干稻草,稻草,樹皮和其他原材料,也被雨水浸泡,或其他原因引起的濕稻草、樹葉、樹枝、稻草和其他中國的原材料。
雨后,雨濕的稻草和其他材料,怎么辦?河南譽恒機械設備有限公司是生產的秸稈煤成型機設備可以干,濕稻草、麥秸,處理后可以喂動物。它還為用戶減少了材料的空間. .秸稈煤成型機輸出從1噸每小時2.5噸每小時。各種類型和輸出滿足不同用戶的不同需求。-秸稈成型機 飼料顆粒機 反擊式破碎機 螺旋分級機
秸稈煤成型機,一年四季,無論天氣可以幫助你處理的廢棄物,其將廢物轉化為財富,所以你獲得第二,燃料,也為用戶減少家庭支出。秸稈煤成型機完成燃燒熱值高、直徑大小可調,選擇不同的光盤可以根據用戶的需要。
正如你指出的錯誤譽恒飼料顆粒機
許多農民為了提高生產加料速度,開始使用飼料顆粒機。但不清楚先知飼料顆粒機失敗,譽恒今天告訴你,可以看到從顆粒機密失敗?-
首先,飼料顆粒機生產顆粒機后發現粒子表面不均勻,甚至粒子上面有很多額外的傷口。這個問題表明,粒子的葉片在機器內部有問題,如果葉片完整生產粒子表面非常光滑,幾乎大小進行了比較。
第二,粒子的表面太光滑,這也是一個問題,可以機械硬過高,顆粒飼料機環模式壓縮率相對較小,增加了壓縮洞,這種現象是相對罕見的,很難滿足這類問題,而且早期盡量避免施工時間,施工前要做的*件事就是飼料檢查對象,如沒有困難。
第三,當水太高時,阻止機器的現象經常發生,所以我們試圖進行施工后測試粒子的水分。如果飼料顆粒機太多水當我們必須干燥,或曬干,盡量避免在濕顆粒結構,這樣會增加機械上的負載,它是影響飼料顆粒機的正常運行。
河南譽恒機械設備有限公司是生產的谷物飼料機的優勢高產、低能源消耗,為你提供完善的售后服務,歡迎各地朋友來我公司參觀,學習。
The effect of the straw coal forming machine after the rain is good
Yuheng brand straw coal molding machine, for dry straw, straw, bark and other raw materials, but also for being rain soaked, or other reasons caused by the wet straw, leaves, twigs, straw and other Chinese raw materials.
After the rain, straw and other materials wet by the rain, how to do? Henan Yuheng Machinery Equipment Co., Ltd. is the production of straw coal molding machine, the equipment can be dry, wet straw, wheat straw, after processing can be fed animals. It also reduces the space of material for the user.. Straw coal molding machine output from 1 tons per hour to 2.5 tons per hour. Various types and output meet the different needs of different users.
Straw coal molding machine, all the year round, in any weather can help you deal with the side of the waste material, its turning waste into treasure, so you get the second, fuel, also for the user to reduce the household spending. Straw coal molding machine finished high combustion heat value, diameter size adjustable, choose different disc can according to user needs.
As you point out the fault Yuheng feed particle machine
Many farmers in order to improve the production feed rate, are starting to use the feed pellet machine. But it was not clear how prophet feed particle machine failure, Yuheng today to l you that from what can be seen pellet confidential failure?
First, feed particle machine for producing granular machine after found particles surface is uneven and even particle above have a lot of extra wound. This problem shows that the blade of particles inside the machine there is a problem, if the blade intact in the production of particle surface is very smooth and almost the size are compared.
Second, the surface of the particle is too smooth, this is also a problem, which can mechanical hard too high, grain feed machine ring mode compression ratio is relatively small, increasing the compression hole, this phenomenon is relatively rare, hardly meet this kind of problem, but also to early construction of time as far as possible to avoid, the first thing to do is prior to construction of feed check to see if there is no hard objects such as.
Third, when the water is too high, the phenomenon of blocking machine often occurs, so we try to carry out the construction after the test of the particle moisture. If feed particle machine too much water when we have to dry off, or dried, try to avoid in the wet particles when construction as this will increase the load on the mechanical, it is affecting the normal operation of the feed particle machine.
Henan Yuheng Machinery Equipment Co., Ltd. is the production of grain feed machine has the advantages of high yield, low energy consumption, for you to provide perfect after-sales service, always welcome from friends around to my company visit, study.